Field
Option
Description
Display only
Available for
To folder:
Same as job
. Dis-
plays the data storage device of the selected
Job
.
Working job
Display only
Data is stored to this job.
Tunnel job
Display only
Contains all the information about the tunnel
design including the geometry of the centre-
line and the tunnel profile. The files are
stored in the
\
DBX folder or a subfolder of
\
DBX.
The tunnel job is a read-only source of infor-
mation.
Layer
Display only
The layer from the active tunnel job, selected
in the
Define
panel.
Start chain-
age
and
End chain-
age
Editable field
Define the range from which DXF profiles are
exported.
Report
sheet
Editable field
The name of the file to which the data is
exported.
Next step
Fn
Settings
goes to
Dxf Export Settings
.
Key
Description
OK
To save the settings and return to
Export Dxf Profiles
.
Description of fields
Field
Option
Description
Columns
Editable field
The number of columns to organise the DXF.
Example: With
4
selected, four profiles are
exported per line.
Export exca-
vation areas
Check box
When this box is checked, the excavation
areas of the tunnel are exported.
Close the
measured
profiles
Check box
When this box is checked, the exported pro-
files are closed for display purposes.
Use a com-
parison
plane
Check box
When this box is checked, a plane is added
to the export file for comparison purposes.
The plane is added in the defined difference
from the centreline.
CL height
diff
Editable field
Height difference from the centreline.
Use a pro-
file offset
filter
Check box
When this box is checked, only the profiles
for which the perpendicular offset to the
design profile is smaller than the defined
limit are exported.
Dxf Export Settings
838
Roads - Tunnel
