For
Profile by measuring
Field
Option
Description
Apply target
radius
Check box
When using a prism to check a design profile,
it is important to take the prism radius into
account.
The measured point is projected by a dis-
tance equivalent to the radius of the prism in
a direction perpendicular to the tangent of
the design profile.
When this box is not checked, the design
profile is compared to the coordinates of the
centre of the prism at the measured posi-
tion.
b
a
d
c
~2m
>4m
Tunnel_013
a Tangent to design profile
b Prism radius
c Prism
d Design profile
If measurements to any surface are used or
no design profile has been defined, the
prism radius parameter is not used in the cal-
culation.
In 3D viewer, a plot of the measured point
regarding the design profile is displayed.
Target
radius
Editable field
Available when
Apply target radius
is
checked. The radius of the prism.
For
Profile by scanning
Field
Option
Description
Define a
scan task
Scan whole
profile
Each profile is scanned 360°/400 gon.
Scan seg-
ment
The tunnel profile can be split into user-
defined segments. Each segment can be
assigned as a scan segment or non scan seg-
ment.
816
Roads - Tunnel
