Leica Captivate, Technical Reference Manual

Page: 500 / 1060

Key Description
OK To change to the second layer of editable fields.
Inverse To calculate the values for the distance and the offset from
two existing points. Available if Azimuth or Horizontal dis-
tance is highlighted.
Last Inv To select the values for the distance and the offset from pre-
vious COGO inverse calculations. Available if Azimuth or
Horizontal distance is highlighted.
Meas app To measure a point manually for the COGO calculation. Avail-
able if Start point or End point is highlighted.
Page To change to another page on this panel.
Fn Settings To configure the COGO app.
Fn Modify To modify the values manually. Available if, Azimuth or Hori-
zontal distance is highlighted.
Description of fields
Field Option Description
Create line
using
The method by which the line is defined.
2 points Uses two known points to define the line.
Point, bear-
ing & dis-
tance
Defines the line using a known point, a dis-
tance and an azimuth of the line.
Start point Selectable list The start point of the line.
End point Selectable list The end point of the line. Available for Cre-
ate line using : 2 points .
Azimuth Editable field The azimuth of the line. Available for Create
line using : Point, bearing & distance .
Horizontal
distance ,
Horizontal
distance
(ground) or
Horizontal
distance
(ellipsoid)
Editable field The horizontal distance from the start point
to the end point of the line. Available for
Create line using : Point, bearing & dis-
tance .
Create Line,
Input page
500 COGO