Leica Captivate, Technical Reference Manual

Page: 268 / 1060

Next step
IF you want to THEN
determine the instrument errors select one of the three available
check and adjust procedures and
refer to the relevant subchapters.
view the current values select View the current values .
Refer to "22.7.7 Viewing the Current
Values".
configure Check & adjust select Check & adjust settings .
Refer to "22.7.8 Configuring Check
& adjust"1.
adjust the circular level Refer to "22.7.9 Adjusting the Circu-
lar Level of the Instrument and Tri-
brach".
inspect the laser plummet Refer to "22.7.11 Inspecting the
Laser Plummet of the Instrument".
adjust the tripod Refer to "22.7.12 Servicing the Tri-
pod".
22.7.4 Combined Adjustment (l, t, i, c, ATRplus and Telescope Camera)
In Check & Adjust , What do you want to do? select Check & adjust the
compensator, index error, line of sight error & automatic target aiming
or Check & adjust the compensator, index error, line of sight error, auto-
matic target aiming & telescope camera and press Next .
The combined adjustment procedure determines the following instrument
errors in one process:
Instrument error Description
l, t Compensator longitudinal and transversal index
errors
i Vertical index error, related to the standing axis
c Horizontal collimation error, also called line of
sight error
ATRplus Hz ATRplus zero point error for horizontal angle
ATRplus V ATRplus zero point error for vertical angle
Telescope camera Hz Telescope camera zero point error for horizontal
angle - option
Telescope camera V Telescope camera zero point error for vertical
angle - option
Before determining the instrument errors, the instrument has to be:
•
levelled up using the electronic level
•
protected from direct sunlight
•
acclimatised to the ambient temperature, approximately 2 minutes per °C
difference compared to the storage place.
Access
Description
☞
268 Settings - TS instrument