Key
Description
Fn
Ell Ht
or
Fn
Height
Available for local coordinates. Changes between the ellip-
soidal and the orthometric height. Changing the height
type does not edit the point.
Next step
Page
changes to the next page.
On this page, the stakeout results are displayed.
☞
When changing
Target height
on the
Obs
page, the
Measured
height
value is updated. The offset values used for staking the point
will not be editable on the
Offset
page.
Key
Description
Store
To store the changes.
Page
To change to another page on this panel.
Description of fields
Field
Option
Description
Design
point ID
Display only
The name of the design point that was
staked.
Difference
in easting
Display only
The difference between the
Design easting
and the
Measured easting
.
Difference
in northing
Display only
The difference between the
Design north-
ing
and the
Measured northing
.
Cut
/
Fill
Display only
The height difference between the
Design
height
and the
Measured height
.
2D distance
Display only
Displays the horizontal difference between
the design point and the staked point.
3D distance
Display only
Displays the spatial difference between the
design point and the staked point.
Design east-
ing
Display only
The entered design Easting.
Design
northing
Display only
The entered design Northing.
Design
height
Display only
The entered design elevation.
Measured
easting
Display only
The Easting measured at the stored point.
Measured
northing
Display only
The Northing measured at the stored point.
Measured
height
Display only
The height measured at the stored point.
Point ID,
Stake results page
Job Menu - View & edit data
83