Next step
OK
changes to
Set Backsight Reference
.
Available when the instrument was set up using
Setup method
:
Known back-
sight
.
Set the backsight to which the angles of the foresight measurements are rela-
ted.
The current setup is used.
Description of fields
Field
Option
Description
Use the cur-
rent back-
sight as the
reference
point
Option but-
ton
Available when the instrument was set up
using
Setup method
:
Known backsight
.
The backsight from the current setup is used.
Foresight measurement is referenced to the
backsight.
Set another
backsight as
reference
point (the
current
setup will
be updated)
Option but-
ton
Available when the instrument was set up
using
Setup method
:
Known backsight
.
The backsight from the current setup is
ignored. A new backsight must be defined.
Next step
IF
THEN
Use the current backsight as the
reference point
was selected
OK
to measure backsight-foresight
sets.
Set another backsight as refer-
ence point (the current setup will
be updated)
was selected
OK
accesses
Define the Backsight
.
Refer to "Define the Backsight".
This panel is displayed
•
when the instrument was set up without a known backsight. The instru-
ment is orientated but has no physical point as a backsight. Therefore a
backsight point must be measured.
•
when
Set another backsight as reference point (the current setup
will be updated)
was previously selected.
Key
Description
Set
To set the setup and orientation.
Distance
To measure a distance to the point being used to set the azi-
muth.
GS
When using SmartPole. To enter the Measure panel and
measure a point with GS. The antenna height is automatically
converted from the target height.
More
To change between the slope and the horizontal distance.
Set Backsight Refer-
ence
Define the Backsight
Apps - The Toolbox
455
