58.10
Traverse Adjustment
58.10.1
Accessing Traverse Adjustment
•
A traverse adjustment can be performed on three components: 2D posi-
tions, angles and elevations.
•
Various adjustment methods are available for selection. Once the adjust-
ment is performed, the results can be reviewed. Adjusted points are stored
into a new job, and a report can be generated.
•
If the message panel appears which requires that the app must be activa-
ted using a licence key then refer to "29.3 Load licence keys".
Survey points have to be measured while Traverse is running to be part of the
adjustment calculations.
The traverse adjustment option can be reached in different ways based on spe-
cific conditions.
Upon completing the observations onto the closing point,
Adjust
to access
Traverse Adjustment
.
OR
After the measurements are done on the closing line for angular closure,
Adjust
to access
Traverse Adjustment
.
OR
When the traverse is closed:
Result
in
Traverse Data
, then
Adjust
in
Tra-
verse Results
to access
Traverse Adjustment
.
Key
Description
OK
To calculate the result.
Page
To change to another page on this panel.
Fn
Settings
To configure the Traverse app. Refer to "58.6 Configuring
Description of fields
Field
Option
Description
Traverse ID
Display only
The ID of the traverse.
Horiz
adjustment
Compass
rule
Suitable for surveys, where angles and dis-
tances were measured with equal precision.
Description
☞
Access
Traverse Adjustment,
Method page
962
Traverse
