Leica Captivate Technical Reference Manual Download Page 66

Page: 66 / 1060

Key

Description

Store

To store the settings.

Data

To view, edit and delete points and lines stored with the job.

Points and lines are shown on separate pages. Selected sort

and filter settings apply.

Page

To change to another page on this panel.

Log

To view, edit and delete points and lines stored with the job.

Points and lines are sorted by time in one list.

Next step
Page

changes to the

CAD files

page.

Refer to "New Job,Codelist page" for information on the

Coordinate system

page.

Key

Description

Store

To store the settings.

Import

To add extra codes from a new codelist to the job. The name

of this codelist is copied to the job.

Codes

To view codes currently stored in the job. Refer to "6.5 Man-

aging Job Codes".

Data

To view, edit and delete points and lines stored with the job.

Points and lines are shown on separate pages. Selected sort

and filter settings apply.

Page

To change to another page on this panel.

Export

To copy codes from the job to an existing or new codelist.

Log

To view, edit and delete points and lines stored with the job.

Points and lines are sorted by time in one list.

Description of fields

Field

Option

Description

Codelist

<None>

No codes are stored in the job.

This default setting can be changed. Choose

a codelist to copy the codes to the job.

Job properties,

Codelist page

Job Menu - Jobs

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands