Icon
Description
Search & lock
Searches for a prism to lock on.
Wait & lock
Locks to a prism as soon as it enters the field of
view of automatic aiming. When previously locked to
a prism and target lock was lost. Works on all prisms
and tape targets.
☞
A PowerSearch helps to lock to shaking
prisms.
Target lock off
Stops the lock.
Target lock on
Sets
Aim at target
:
With lock
.
Target lock off
Sets
Aim at target
to the previous non-lock setting.
Filter learn
Starts a PowerSearch scan by doing three times a
360° scan with different vertical positions of the
telescope.
The PowerSearch scan finds prisms and other reflec-
tive spots in the surrounding of the instrument.
Around each found prism or reflective spot, an exclu-
sion area is defined. The exclusion area has the
dimension of Hz = ± 1 gon, V = ± 50 gon and
d = ± 12 m is defined.
Filter on
Available when
Filter learn
was used before. Turns
on the PowerSearch filter and excludes the learned
prisms from a PowerSearch.
Filter off
Available when
Filter learn
was used before. Turns
off the PowerSearch filter and includes all prisms in a
PowerSearch.
PowerSearch
Prisms are searched for with PowerSearch in the
PowerSearch window when this icon is used.
☞
If this icon is selected and
Meas any sur-
face
is still set, then this setting is
changed to
Measure prism
.
5.3
Icon Pop-Up Bubble: Measure & Target
Icon
Description
Meas any surface
To measure to any surface (reflectorless). Automati-
cally sets
Aim at target
:
Manually
.
Measure prism
To measure to prisms.
Meas continuous
To set the distance measurements to continuous.
Meas single shot
To set the distance measurements to the previous
non-continuous mode.
Targets
To select a prism.
Red laser on
To turn the red laser of the reflectorless EDM on.
Red laser off
To turn the red laser of the reflectorless EDM off.
Bubble icons
30
Icon Pop-up Bubbles
