Type in the one, two or three digits of the quick code. The current setting for
Digits to use
in
Coding
,
Quickcoding
page determines by how many key-
strokes quick coding is executed.
Press
ENTER
to execute quick coding after less than the configured keystrokes.
This action is possible after one keystroke for
Digits to use: 2
and one or two
keystrokes for
Digits to use: 3
.
Press
ESC
to clear digits from the entry.
Only mandatory attribute values can be entered. For non-mandatory attributes,
either the default or the last used attribute values are stored, depending on
the setting for
Suggested attribute values
in
Coding
,
Code & attributes
page.
For point codes:
•
The point code assigned to the quick code is searched for in the job codel-
ist and point measurement begins.
•
The point code and any associated attribute values are stored with the
point.
•
If a point with the same point ID exists in the job, the codes, attribute
names and attribute values of the new and existing points must be identi-
cal. Should they not be identical, a panel opens where the code or attrib-
ute mismatch can be corrected.
For free codes:
•
The free code assigned to the quick code is searched for in the job codelist
and point measurement begins.
•
The free code, associated attribute values and time-related information are
stored. The setting for
Store free code
in
Coding
,
Quickcoding
page
determines if the free code is stored before or after the point.
27.4
Free Coding
27.4.1
Free Coding Using a Codelist
•
The job codelist contains free codes.
•
A hot key is configured to access the panel
Free Code & Attributes
or
the favourites menu is configured to display the option
Data - Select free
code from list
.
Press a hot key configured to access the panel
Free Code & Attributes
. Refer
to "2.2.1 Hot Keys" for information on hot keys.
All free codes from the job codelist which belong to an active code group, are
available for selection.
Codes are listed with the code description, the code group, the code type and
the quick code if codes with quick codes exist in the job.
Requirements
Access
Select Free Code
334
Coding
