Leica Captivate, Technical Reference Manual

Page: 878 / 1060

Field Option Description
Current
scale
Display only Available when Scale TS measurements is
checked in Scale Corrections .
The scale according to the scale settings ( Fn
Scale ) for the selected setup.
Refer to "24 Antenna Heights" for further information regarding height values
used in a SmartStation.
50.5 Setup Details
Setup information must be typed in for Setup method: Resection , Setup
method: Orientate to line and Setup method: Orientate to object . Setup
Details is accessed after selecting OK in Total Station Setup with one of
these setup methods selected.
For a description of keys refer to "50.4 Choose Setup Point".
Description of fields
Field Option Description
Point ID Editable field Type in an ID for the setup point.
Instrument
height
Editable field The height of the instrument.
Point code Selectable list Select a point code for the setup point if
desired.
Choose tar-
get points
from a dif-
ferent job
Check box Available for setup method Resection and
Orientate to object .
Target points can be selected from the
design job.
Job Selectable list The design job from which the target points
can be selected. Refer to "6.3 Choosing a
Job".
Manually
enter the
setup
height
Check box Available for setup method Orientate to
line .
When this box is checked, the height value
of the setup is entered and used to calculate
the height of the measured points.
When this box is not checked, the height of
the setup is calculated relative to the first
measured point. The height can be entered
in Measure Target .
Setup
height
Editable field Available for setup method Orientate to
line with Manually enter the setup height
being checked. The elevation of the instru-
ment setup.
Line
between
target 1 & 2
defines
Available for setup method Orientate to
line .
To define the positive North or positive East
axis.
☞
Access
Setup Details
878 Setup - TS