Metadata
Description
Source
The data storage device where the job is stored.
Date cre-
ated
The date of when the job was created.
The panel is similar to the panel that opens when
View & edit data
was
selected from the job menu. Refer to "7.2 Accessing Data Management" for a
description of the panel.
The differences are:
•
All changes done in the data set are applied to the original jobs.
•
For the key
New
: To create a point/line. New points/lines are stored in the
main job and then displayed in the data set.
•
For the metadata,
Source
is displayed. The linked job to which the point
belongs.
•
On the
3D viewer
page, the points and lines from the linked jobs are dis-
played. Selected filters for the data set points are applied.
The
Dataset
panel can also be accesses by a hot key or a favourites keys.
6.3
Choosing a Job
Select
Leica Captivate - Home
:
Tap here to choose design data
.
The pages that are always shown are:
Points & lines
and
DTM
.
The pages,
Road
,
Rail
and
Tunnel
are only shown if the appropriate app is
loaded.
☞
The design data selected in this panel, are global design data. In the
3D viewer and when using the apps. the global design data will be
overwritten by linked design data from the working job.
Key
Description
OK
To accept the selected job.
Page
To change to another page on this panel.
Fn
Settings
To activate or deactivate job selection at the beginning of an
app.
Dataset
Access
Design Data
62
Job Menu - Jobs
