25
Settings - Point storage
25.1
Duplicate points
Select
Leica Captivate - Home: Settings
\
Point storage
\
Duplicate points
.
In order to check measurements, the same point can be measured more than
once. If activated, an average or an absolute difference is calculated.
The averaging is always done by using TS and GS.
Description of fields
Field
Option
Description
When a point
is stored with
same point ID
as existing
point
Defines the averaging principles for multi-
ple measured points. The selection deter-
mines the availability of the subsequent
fields for setting the acceptable averaging
limits or absolute differences.
Check the
average
Computes the average for the position and
the height. Points exceeding the defined
limits are marked with
!
on the
Mean
page.
Check the
abs diff
Computes the absolute differences
between two points selected from a list of
measured points which are all stored with
the same point ID.
Don't check
Averaging is turned off. No other fields are
available.
Method
The method used for computing the aver-
age. Available for
When a point is stored
with same point ID as existing point
:
Check the average
.
Weighted
Calculates a weighted average
No weight-
ing
Calculates an arithmetic average.
Limit in posi-
tion
and
Limit in
height
Editable field
The acceptable difference for the position
and height components. Available for
When a point is stored with same point
ID as existing point
:
Check the average
.
From
Easting
to
Cartesian Z
Editable
fields
The acceptable absolute differences for
each coordinate component. Available for
When a point is stored with same point
ID as existing point
:
Check the abs diff
.
25.2
Prompt before storing
Select
Leica Captivate - Home: Settings
\
Point storage
\
Prompt before
storing
.
Check a box if you want to be asked for input/selection when storing a point
with
Store
.
Access
Duplicate Points
Access
Prompt Before Stor-
ing,
GS and TS page
Settings - Point storage
299
