Key
Description
OK
To continue to the next panel.
Add point
To add points from the job to define the reference plane.
Available when creating a plane from previously stored
points.
Use
To change between
Yes
and
No
in the
Use
for the highligh-
ted point.
Delete
To remove the highlighted point from the list.
Meas app
To measure a point to be used for the plane. Available when
creating a plane by measuring new points.
Page
To change to another page on this panel.
Next step
Page
changes to the
3D viewer
page.
This panel is displayed if
Use local plane coordinate system
is checked in
Configuration
,
Parameters
page.
Key
Description
OK
To compute and store the reference plane.
Meas app
Available when
Point
is highlighted. To measure a point to
define the plane direction.
Description of fields
Field
Option
Description
Current ori-
gin point
Display only
Point which has been selected as origin
point.
X coordi-
nate
Editable field
Enter local X coordinate of origin. The origin
is defined as the projection of the measured
point onto the calculated plane.
Z coordinate
Editable field
Enter local Z coordinate of origin. The origin
is defined as the projection of the measured
point onto the calculated plane.
Point
Selectable list Defines the direction of the Y axis.
Plane Coordinate Sys-
tem
604
Reference Plane & Grid Scan
