Field
Option
Description
Height off-
set
Editable field
The height offset between
‑
100 m and
100 m from the related auto point.
Identifier
Editable field
The identifier with up to four characters is
added in front of or at the end of the ID of
the auto point. This ID is then used as the
point ID for the related offset point. This
functionality could support an automatic
workflow into CAD packages including setting
symbols and stringing lines.
Prefix/suffix Prefix
Adds the setting for
Identifier
in front of
the auto point ID.
Suffix
Adds the setting for
Identifier
at the end of
the auto point ID.
Next step
Page
changes to the
Code
page.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
New attrb
To create more attributes for the selected code.
Last
To recall the last used attribute values for the selected code.
Default
To recall the default attribute values for the selected code.
Page
To change to another page on this panel.
Description of fields
Field
Option
Description
Code
Selectable list The code for the offset point.
The attributes are shown as display only,
editable field or selectable list depending on
their definition.
Attributes
Editable field
Up to eight attribute values can be stored.
Auto Points - Offset
1,
Code page
942
Measure - Auto Points
