Leica Captivate Technical Reference Manual Download Page 340

Page: 340 / 1060

Field

Option

Description

•

The job spin when a job is tapped

•

The icon pop-up bubbles when an icon is

tapped

•

The sliding of the underline when pages

are selected

Animations are a method of drawing atten-

tion to the user that a change has happened

inside Leica Captivate. This change could be

caused by the user himself or may be auto-

matically generated by Leica Captivate to

notify the user that something has changed.

Transitions are a method designed to notify

the user that the panel being displayed in

the Leica Captivate software is changing.

These visual aids are useful as Leica Capti-

vate has many similar looking panels. Transi-

tions allow the user to navigate through the

software more easily.

☞

The setting is stored as part of the

system and always remembered

even after restarting the instru-

ment.

GS position

update rate

0.2s

0.5s

1.0s

The panel update rate for the GNSS posi-

tions.

Next step
Page

changes to the

Audio

page.

340

Settings - System

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands