000244_002
P0
P1
P3
d2
d1
P2
For GS:
P0 Start point
P1 End point
P2 Design point
P3 Reference point
d1
Height offset
, for
Height:Start point of line
d2
Height offset
, for
Height:From line
000417_002
P1
P2
P4
d2
d1
P3
P0
For TS:
P0 Instrument setup
P1 Start point
P2 End point
P3 Design point
P4 Reference point
d1
Height offset
, for
Height:Start point of line
d2
Height offset
, for
Height:From line
This panel is for typing in the stakeout values for a point relative to the line.
The fields available depend on the options chosen in the
Settings
panel.
Key
Description
OK
To confirm the selections and to continue with the subse-
quent panel.
Stake -
/
Ch-
To decrease the distance along line/the chainage by
Incre-
ment
.
Stake +
/
Ch+
To increase the distance along line/the chainage by
Incre-
ment
.
Fn
Settings
To configure the Measure to line/Stake to line app. Refer to
"41.3 Configuring Measure to line/Stake to line".
Fn
Report
To view an alignment report. Refer to " Save Line
Fn
Start
and
Fn
End
To change between the start point and the end point of the
line.
Stake to line - vertical
measurements
Define Stake
588
Measure to line/Stake to line
