Field
Option
Description
From job
Selectable list All jobs are available for selection.
Line
Selectable list Line from the selected Road job. The line
must be stored in the \DBX folder of the data
storage device to be selectable.
The report displays information on the points that have been measured with
the current selected design job, and current select line.
Key
Description
OK
To return to the panel from which this panel was accessed.
Edit
To edit details of the highlighted point.
Save
To save the alignment report.
More
To change the values displayed between
Offset
,
Cut/fill
,
Measured height
,
Design ht
,
Point ID
and
Pt code
.
Page
To change to another page on this panel.
Next step
Page
changes to the
3D viewer
page. Use
Ch-
and
Ch+
to the previous or
next measured point.
☞
3D viewer
is not updated with shifts.
Key
Description
OK
To confirm the selections and to return to the previous panel.
Description of fields
Field
Option
Description
Apply shift
Check box
Check to apply a shift.
Horizontal
Editable field
Distance to shift the line horizontally to the
left or right.
Vertical
Editable field
The vertical shift of the line.
Save Line Report,
Points page
Define Shifts
580
Measure to line/Stake to line
