Field
Option
Description
☞
Points are only displayed on the
image. They are not saved with the
image.
Line IDs
Check box
When this box is checked, then the line IDs
are displayed with the lines.
Alignments
Check box
When this box is checked, then the active
alignment of the active Rail, Road or Tunnel
job is displayed.
Alignment
ID
Check box
When this box is checked, then the line IDs
for all shown alignments are displayed in.
Lines &
alignments
size
Determines the thickness of selected and
non-selected lines.
Non-selected lines
Selected lines
3 pixels
3 pixels
6 pixels
2 pixels
2 pixels
4 pixels
1 pixel
1 pixels
3 pixels
Vertical
exaggera-
tion of pro-
files
Editable field
A scale factor to be applied over the vertical
axis. A profile will be exaggerated in the ver-
tical direction, but it will remain the same for
the horizontal. The value can be between 0.1
and 50.
☞
This setting only has an effect in
applications where cross-section
views are displayed.
Display
additional
layers in
cross sec-
tion view
Check box
When this box is checked, all layers of an
alignment are displayed in a cross section
view.
When this box is not checked, only the active
layer will be displayed.
Next step
Page
changes to the
Scans
page.
Description of fields
Field
Option
Description
Scans
Check box
Determines if point clouds from scan are dis-
played.
When this box is checked, the 3D point
clouds are displayed.
Colour
scans using
Available if
Scans
is ticked.
Object Display,
Scans page
412
3D viewer
