Field
Option
Description
Only for
curves
under a
radius of
Editable field
Available when
Use different increment on
curves
is checked. Defines the threshold
value of a small radius curve. For example, a
curve with a radius smaller than this value,
uses the chainage increment defined in the
following field.
Next step
OK
to accept changes and continue to
Stake Points
.
Once in the
Stake Points
panels, the user is guided to reach design positions.
The functionality of this panel is similar to the
Stake Points
panel. Differences
between the two panels are outlined here. Refer to paragraph "51.4 Staking
Out" for all other key and field explanations.
In the title bar is a description of where the stake point is on the alignment.
This description can come from the position of the defined stake point along
the line or a point of intersection. For points of interest, refer to "Points of
The availability of the fields depends on the settings in
Settings
,
General
page.
Key
Description
Stake -
/
Ch-
To decrease the distance along line/the chainage by
Incre-
ment
.
Stake +
/
Ch+
To increase the distance along line/the chainage by
Incre-
ment
.
Fn
Tools
Refer to "37 Apps - The Toolbox".
Description of fields
Field
Option
Description
Point ID
Editable field
The point ID of the point to be staked.
Target
height
Editable field
For TS:
The last used target height as defined is sug-
gested. An individual target height can be
typed in.
Stake Points,
page
590
Measure to line/Stake to line
