Field
Option
Description
Measure all
points in
two faces
Check box
To take a measurement in Face I and Face II.
The point stored is an average of the two
measurements. When an instrument is fitted
with auto aiming, the point is automatically
measured in both faces. The resulting point
is stored and the instrument is returned to
the first face.
Next step
Page
changes to the
Report sheet
page. Refer to "36 Apps - General".
51.4
Staking Out
This diagram shows an example for
Navigational arrow types:
In/out, left/
right
.
P0
P1
d3
d2
d1
GS_054
For GS:
P0 Current position
P1 Point to be staked
d1 Forwards or backwards
d2 Right or left
d3 Fill or cut
TS_011
P0
P1
P2
d2+
d3+
d1-
For TS:
P0 Setup
P1 Current position
P2 Point to be staked
d1 Forward or backwards
d2 Right or left
d3 Cut or fill
This diagram shows an example
Navigational arrow types:
Direction & dis-
tance
.
P0
GS_055
P1
d2
d1
For GS and TS:
P0 Current position
P1 Point to be staked
d1 Distance
d2 Cut or fill
α
Direction
Diagram
902
Stakeout
