Field
Option
Description
Check
height diff
Editable field
Available for Check. Vertical offset from the
reference line or surface, as defined by the
chosen method, of the point to stake.
☞
The following field is shown for the Stake methods
Line
,
Local
line
,
Local manual slope
and
Manual slope
.
Use non-
perpendicu-
lar offset
Check box
When this box is not checked the measured
point is projected in a right angle to the
selected line.
When this box is checked, any projection
angle can be defined.
Offset angle
Editable field
Manually defined projection angle.
☞
The following fields are shown in the
Line
,
Local line
,
Surface
grade
and
Crown
methods when
Show information to an addi-
tional line
is checked in the Define panel.
Apply off-
sets to
additional
line
Check box
When this box is checked, an offset to the
additional line can be defined.
Horizontal
offset
Editable field
Horizontal stake/check offset to the addi-
tional line.
Vertical off-
set
Editable field
Vertical stake/check height difference to the
additional line.
Next step
Page
changes to the page.
Type of height
Overrules
Height offset
Manually entered
OR
Obtained from individ-
ual point
All other heights
Considered
Use DTM height for
stakeout (toolbox:
Use
heights from DTM
)
Design height
Considered
From design
No other heights
Considered
Show DTM height differ-
ence on
Info
page
(toolbox:
Use heights
from DTM
)
No influence on priori-
ties
For additional info only
-
A user-definable page exists for each of the stake methods and check
methods. Refer to the chapters from "43.3.2 Road Line - Info Page"to "43.3.8
Road DTM - Info Page".
Refer to "Road Settings,Info page" for information on all available items for the
page and how to select them.
Understanding priori-
ties of various
heights
Stake/Check panel,
page
Roads - Road
759
