Description of fields
Field
Option
Description
Point ID
Editable field
Name of the next point to be stored. The ID
is incremented/decremented whenever a
point gets stored.
Antenna
height
Editable field
For GS:
Height of the antenna.
Antenna
height
Editable field
For GS:
Perpendicular height of the antenna. Availa-
ble when the perpendicular height is config-
ured. Refer to " Road Settings,Rail design
Target
height
Editable field
For TS:
Height of the prism.
Using a gauge device, the target height is
always applied perpendicular. In this case,
the setting for
Apply target height
in
Rail
Settings
,
Rail design
page is ignored.
Perpendicu-
lar target ht
Editable field
For TS:
Perpendicular height of the prism. Available
when the perpendicular height is configured.
Refer to " Road Settings,Rail design page".
Stake chain-
age
Editable field
The defined chainage of the point to be
staked out. For multiple tracks that have a
defined chainage centreline, the chainage to
be staked out always refers to the chainage
of the chainage centreline, not to the chain-
age of the track centreline.
Chainage
increment
Editable field
Value by which the nominal chainage increa-
ses/decreases when pressing
Ch -
/
Ch +
.
To stake a point at more than one chainage,
define a chainage increment.
Allow enter-
ing the
measured
super-eleva-
tion
Check box
When this box is checked, the cant value
(superelevation) which was measured with
an inclination sensor can be entered man-
ually. The difference of the manually entered
cant value and the current design cant is dis-
played on page.
When this box is not checked, no cant differ-
ence (superelevation) is calculated of the
current design cant and the measured cant.
The current cant can be measured using the
option
Second point of super-elevation
from the toolbox.
Measured
super-eleva-
tion
Editable field
Available when
Allow entering the meas-
ured super-elevation
is checked. Positive or
negative signs must be entered. Seen in
increasing chainage direction:
800
Roads - Rail
