Mode
Description
The horizontal and height distances from the meas-
ured points to the average are computed and dis-
played on the
Mean
page.
A check is performed that the differences in position
and height, between the
averaged point
and the
point being stored, do not exceed the defined limits.
Check the abs diff
What is described for
Don't check
also applies for
Absolute differences
. Additionally, the
absolute
difference
between two points selected from a list
of measured points with the same point ID, is
checked to be within the defined limits.
Don't check
Averaging functionality is turned off. With more than
one measured coordinate triplet recorded for the
same point, no average for the position and the
height is computed.
Averaging with position only or height only points
Position only points, height only points and points with full coordinate triplets
are handled in the averaging.
The
Mean
page can be accessed if
When a point is stored with same point ID as existing point: Check the
average
or
When a point is stored with same point ID as existing point:
Check the abs diff
is configured in
Duplicate Points
.
AND
more than one measured coordinate triplet is recorded for the same point
using the same point ID.
1.
In
Job name
,
Points
page, highlight a point to be edited.
2.
Edit
to access
Job name
,
Mean
page.
All measured coordinate triplets recorded using the same point ID are shown.
Key
Description
Store
To store the changes.
Use
To change between the options in
Use
metadata for the
highlighted coordinate triplet. To include or exclude this trip-
let in or from the calculation of the average.
Access step-by-step
Point ID,
Mean page
Job Menu - View & edit data
89
