Leica Captivate Technical Reference Manual Download Page 370

Page: 370 / 1060

Field

Description

Leica Captivate ver-

sion

Firmware version for the onboard software.

An information is displayed, when a new Leica

Captivate version is available in myWorld. For an

automatic check, the instrument must be connec-

ted to the Internet.

For the installation of the new firmware, the

ustomer

are

ackage installed must be valid.

API version

Firmware version for the app interface.

CCP end date

Expiry date of the software maintenance (

usto-

mer

are

ackage).

When the TS or CS is switched on, a reminder

message appears within one month of the due

date of the software maintenance or when the

software maintenance has expired.

☞

The message appears only once!

displayed on the

Leica Captivate -

Home

until the licence key has been

updated.

Refer to "29.3 Load licence keys" for updating

licence keys.

mySecurity end date

If mySecurity is activated in myWorld: The date

when the instrument must be connected to mySe-

curity in order to renew the security functionality.

If mySecurity is not activated in myWorld:

Not

activated

is displayed.

Status of app related

licence keys

The information listed here indicates for which

apps the licence keys are loaded.

Next step
Page

changes to another page on this panel.

370

Settings -About Leica Captivate

Summary of Contents for Captivate





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands

Leica Captivate, Technical Reference Manual

Search results

Summary of Contents for Captivate

Reviews:

Related manuals for Captivate

Brands by name

Popular brands