3M SD-200 Quick Start Download Page 1

Measuring Sound Pressure Level (SPL)

QU

IC

ST

AR

2

Display and Keys

1.  LEDs:  Used in the LED Alert           measurement screen 

2.  Screen indicators: 

Slow time response & A frequency weighting (S, A is a common setting)

3.  Measurement type (SPL, L

EQ

/L

AVG

, LED Alert         , MAX, MIN, Run-Time          )

     •  Note:  No indicator signifies SPL

4.  Measurement value

5.  F/S (Fast/Slow time response) key

6.  Mode key (cycles through measurement screens)

7.  Run/Stop key for averaging values (L

EQ/

L

AVG

, MAX, MIN, LED Alert         , Run-Time        )

8.  Power On/Off key  

9.  A/C frequency weighting key

1. 

  

Place windscreen over microphone (if not attached)

2.   Power on         the SD-200 and check that the battery indicator          is not present. 

• 

If present, charge the instrument prior to measuring.  

3.   Select desired weighting and/or response time. (See diagram #5 and #9.)

4.   Position the SD-200  microphone so it is angled about 70 degrees from the noise source. 

5.   Measures:  when first powered on, the current SPL will be displayed or the last viewed parameter.       

      •  For integrated measurements, press the Run/Stop           key.  (Unlike SPL, the L

EQ

/L

AVG

 values 

         will provide steadier values over a period of time until values become more stable.)

      •  To view measurements, repeatedly press the Mode          key.  (

This cycles through the measurements.)

      •  Press Run/Stop          key to Stop measuring.

6.   Power off by pressing and holding the         key until it turns off (while not in run mode).

9

5

6

7

8

1

3

4

3M

TM

 Sound Detector SD-200

Reviews: