SEW-Eurodrive MOVIDRIVE compact MCH41A, System Manual

Page: 30 / 436

30
System Manual – MOVIDRIVE® compact Drive Inverters
2
General technical data
Technical Data and Dimension Drawings
2.2 General technical data
The following table lists the technical data applicable to all MOVIDRIVE
®
compact
drive
inverters, regardless of their type, version, size and power rating.
MOVIDRIVE
®
compact All sizes
Interference immunity Complies with EN 61800-3
Interference emission with EMC-com-
pliant installation Sizes 1 to 5:
•
Comply with EN 61800-3
• According to class B limit to EN 55011 and EN 55014
Sizes 1 and 2:
•
Comply with class A limit to EN 55011 and EN 55014 on
the line side without further measures
Ambient temperature
ϑ
U
Derating ambient temperature
Climate class
0 °C...+50 °C when I
D
= 100 % I
N
and f
PWM
= 4 kHz
0 °C...+40 °C when I
D
= 125 % I
N
and f
PWM
= 4 kHz
0 °C...+40 °C when I
D
= 100 % I
N
and f
PWM
= 8 kHz
Derating:
•
2.5 % I
N
per K between 40 °C - 50 °C
• 3.5 % I
N
per K between 50 °C - 60 °C
EN 60721-3-3, class 3K3
Storage temperature
1) ϑ
L
1) In case of long-term storage, the unit must be connected to the mains voltage for at least 5 minutes every
two years, otherwise the unit’s service life may be reduced.
–25 °C...+70 °C (EN 60721-3-3, class 3K3)
DBG keypad: –20 °C...+60 °C
Cooling type (DIN 51751) Forced cooling
Temperature-controlled fan, response threshold at
ϑ
= 45°C
Enclosure Sizes 1 to 3
EN 60529 Sizes 4 and 5
(NEMA 1)
IP20
IP00 (power connections); IP10 with mounted plexiglas cover
supplied as standard
Operating mode Continuous operation with 50 % overload capacity
Overvoltage category III according to IEC 60664-1 (VDE 0110-1)
Pollution class 2 according to IEC 60664-1 (VDE 0110-1)
Installation altitude Up to h
≤
1,000 m there are no restrictions.
At h
≥
1,000 m and above the following restrictions apply:
• From 1,000 m to max. 4,000 m:
–
I
N
reduction by 1% per 100 m (330 ft)
• From 2,000 m to max. 4,000 m:
–
AC 230 V units: V
N
reduction by AC 3 V per 100 m
– AC 500 V units: V
N
reduction by AC 6 V per 100 m
Over 2,000 m only overvoltage class 2; external measures
required for overvoltage class 3. Overvoltage classes accord-
ing to DIN VDE 0110-1.
P
i
f
kVA
Hz
n