System Manual – MOVIDRIVE® compact Drive Inverters
111
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Explanation of the parameters
Parameters
P01x Status displays
P010 Inverter
status
Status of the unit output stage (INHIBITED, ENABLED).
P011 Operating
state
The following operating states are available:
•
0: 24 V OPERATION (inverter not ready for operation)
•
1: CONTROLLER INHIBIT
•
2: NO ENABLE
•
3: CURRENT AT STANDSTILL
•
4: ENABLE (VFC)
•
5: ENABLE (N-CONTROL)
•
6: TORQUE CONTROL
•
7: HOLD CONTROL
•
8: FACTORY SETTING
•
9: LIMIT SWITCH
•
A: TECHNOLOGY OPTION
•
c: REFERENCE OPERATION
•
d: FLYING START IS RUNNING
•
EN: CALIBRATE ENCODER
•
F: FAULT
•
H: MANUAL MODE
•
t: WAITING ON DATA
P012 Error status
Error number and error in plain text.
P013 Current
parameter set
Parameter set 1 or 2.
P014 Heat sink
temperature
Unit: [°C]
Heat sink temperature of the inverter in the range –40 °C ... 0 ... 125 °C.
P015 Operating
time
Unit: [h]
Total number of hours for which the inverter has been connected to the mains or an
external DC 24 V supply. Storage cycle every 15 min.
P016 Enable time
Unit: [h]
Total number of hours for which the inverter was in ENABLE operating status; storage
cycle every 15 min.
P017 Work
Unit: [kWh]
Total of the active energy the motor has consumed; storage cycle every 15 min.
P02x Analog setpoints
P020/P021 Ana-
log input AI1/AI2
Unit: [V]
Voltage (–10 V... +10 V) at analog input AI1 (020) and at the optional analog input AI2
(021). If P112 AI1 Operating mode = N-MAX, 0(4) ... 20 mA and S11 = ON, then the dis-
play will show P020 0(1) ... 5 V = 0(4) ... 20 mA.
P022 External
current limitation
Unit: [%]
If P120 AI2 operating mode (optional) = 0 ... 10 V I-limit, then P022 will display the ex-
ternal current limitation that is active.
P6..
P60.
P600
Summary of Contents for MOVIDRIVE compact MCH41A
Page 2: ...SEW EURODRIVE Driving the world...
Page 432: ......
