System Manual – MOVIDRIVE® compact Drive Inverters
19
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Application modules for MOVIDRIVE® compact
System Description
1.4
Application modules for MOVIDRIVE
®
compact
The drive applica-
tion
The drive application often involves more than just adjusting the speed of a motor. The
inverter often has to control motion sequences and take on typical PLC tasks. Increas-
ingly complex drive applications have to be solved, without this resulting in lengthy
project planning and startup processes.
The solution with
MOVIDRIVE
®
SEW-EURODRIVE offers various standardized control programs specifically for "posi-
tioning," "winding" and "controlling" applications. These programs are called application
modules. The application modules are part of the MOVITOOLS
®
operating software and
can be used with units in application version.
A user-friendly user interface guides you through the process of setting the parameters.
All you have to do is enter the parameters you need for your application. The application
module uses this information to create the control program and loads it into the inverter.
MOVIDRIVE
®
takes over complete control of the motion processes, the load is taken off
the machine control and decentralized concepts are easier to implement.
The advantages at
a glance
•
Wide range of functions
•
User-friendly user interface
•
You only have to enter the parameters needed for the application
•
Guided parameter setting process instead of complicated programming
•
No programming know-how required
•
No lengthy training, therefore quick project planning and startup
•
All movement functions are controlled directly in MOVIDRIVE
®
•
Decentralized concepts can be implemented more easily
Scope of delivery
and documenta-
tion
The application modules are part of the MOVITOOLS
®
software and can be used with
MOVIDRIVE
®
compact
in application version (...-0T). The individual application manu-
als can also be downloaded as PDFs from the SEW homepage.
Available applica-
tion modules
The application modules currently available are listed below. These application modules
are explained in the following pages.
Positioning
Linear movement; the inverter manages the movement records:
•
Table positioning via terminal or fieldbus
Linear movement; the PLC manages the movement records:
•
Positioning via bus
•
Extended positioning via bus
•
Absolute positioning (rapid / creep speed positioning)
Rotary movement:
•
Module positioning via terminals: The inverter manages the movement records
•
Module positioning via fieldbus: The PLC manages the movement records
Winding
•
Center winder
Controlling
•
Flying saw
•
DriveSync via fieldbus
•
Sensor-based positioning
Summary of Contents for MOVIDRIVE compact MCH41A
Page 2: ...SEW EURODRIVE Driving the world...
Page 432: ......
