SEW-Eurodrive MOVIDRIVE compact MCH41A, System Manual

Page: 142 / 436

142
System Manual – MOVIDRIVE® compact Drive Inverters
3
Explanation of the parameters
Parameters
P63x Binary outputs option
P630 ... P637
Binary output
DO1Ø ... DO17 The following functions can be assigned to the binary outputs:
Function
Binary output has
factory set to See also
"0" signal "1" signal
NO FUNCTION Always "0" signal – DOØ2
/FAULT Collective fault signal – -
READY FOR OPERATION Not ready for operation Ready for operation DOØ1
OUTPUT STAGE ON Unit inhibited Unit enabled and motor energized
ROTATING FIELD ON No rotating field Rotating field
BRAKE RELEASED
1)
Brake applied Brake released
BRAKE APPLIED
1)
Brake released Brake applied
MOTOR STANDSTILL Motor is turning Motor stopped
PARAMETER SET Parameter set 1 active Parameter set 2 active
SPEED REFERENCE
P403 = n < n
ref
(n > n
ref
)
n > n
ref
(n < n
ref
) n < n
ref
(n > n
ref
) P40x
SPEED WINDOW
P413 = WITHIN (OUTSIDE) Speed is outside (within) speed
window
Speed is within (outside) speed
window
P41x
SP/ACT.VAL.COMP.
P422 = n = n
set
(n <> n
set
)
n <> n
set
(n = n
set
) n = n
set
(n <> n
set
) P42x
CURRENT REFERENCE
P433 = I < I
ref
(I > I
ref
)
I > I
ref
(I < I
ref
) I < Iref (I > I
ref
) P43x
Imax SIGNAL
P442 = I = I
max
(I < I
max
)
I < I
max
(I = I
max
) I = I
max
(I < I
max
) P44x
/MOTOR UTILIZATION 1
100 % prewarning of motor pro-
tection in parameter set 1
–
P34x
/MOTOR UTILIZATION 2
100 % prewarning of motor pro-
tection in parameter set 2
–
IPOS IN POSITION Position not reached Position reached
IPOS
plus®
manual
IPOS REFERENCE No referencing Referencing
IPOS OUTPUT Depends on IPOS program
/IPOS FAULT Error message IPOS program –
1) Use binary output DBØØ to control the brake. This binary output has the fixed assignment of the "/BRAKE" function. The "BRAKE
RELEASED" and "BRAKE APPLIED" signals are intended to be passed on to a master controller.
NOTE
The binary signals are only valid if the inverter has signaled "READY" after switch-on.
Binary signals have "0" status while MOVIDRIVE
®
is being initialized.
Several terminals can be assigned the same function.
P6..
P60.
P600