SD-M1302 & SD-M1402 DVD-ROMs
with REALmagic Ho Playback Card
Installation Instructions
Congratulations on your purchase of a Toshiba SD-M1302 or SD-M1402
DVD-ROM drive and REALmagic Ho DVD/MPEG-2 Playback
Card Kit. The following information will help you in the simple installa-
tion of your new DVD-ROM. It is assumed that you are replacing a
presently installed CD-ROM with the enclosed DVD-ROM. If this is not
the case, additional installation hardware may be required. Refer to
REALmagic Ho User’s Guide for installation instructions on
the DVD/MPEG-2 Playback Card.
CHECKING YOUR KIT PACKAGING
Please unpack your DVD kit, and assure that you have the following items:
l
Toshiba SD-M1302 or SD-M1402 ATAPI DVD-ROM drive
l
DVD/MPEG-2 PCI Playback Card
(compatible with all graphics cards)
l
13” 3.5mm ext. audio cable
l
14” HDB15 - 9 DIN overlay cable
l
S-Video to RCA video converter cable
l
REALmagic™ Accessory Kit envelope
(with software, demo CD and Playback Card User’s Guide)
l
SD-M1302 & SD-M1402 DVD-ROM Installation Instructions
(this manual)
Additional items you may need that are not included in the kit are:
l
Screwdriver
l
mounting screws and mounting hardware
l
IDE BUS cable
l
DVD/CD-ROM Sound Cable
SYSTEM REQUIREMENT
The DVD-ROM kit requires the following:
✔
2MB of free hard disk space
✔
16MB of RAM
✔
Pentium-based PC (or compatible), 133MHz or higher
✔
PCI 2.1 compliant expansion slot
✔
VGA Card
✔
Plug and Play BIOS support
✔
Microsoft™ Windows 95 or higher
✔
Amplified stereo speakers
TOSHIBA