System Manual – MOVIDRIVE® compact Drive Inverters
25
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Application modules for MOVIDRIVE® compact
System Description
Controlling
•
Flying saw
The "flying saw" application module is suited to applications in which endless material
has to be cut, sawn or pressed, for example in diagonal saws or flying punches.
This application module is used to control the sequence of motion according to specific
values. This application module has the following features:
•
Choice of fieldbus or terminal control.
•
Cut edge protection or sorting using the "pulling a gap" function.
•
Immediate cut function by manual interrupt.
•
Counter for material length.
•
Straightforward connection to the higher-level controller.
•
Guided startup and diagnosis.
Four operating modes are available for controlling the machine:
•
Jog mode: The machine can be moved manually.
•
Reference travel: The system reference point is determined.
•
Positioning mode
•
Automatic operation
•
DriveSync via fieldbus
The "DriveSync via fieldbus" application module makes it possible to implement convey-
or systems and machinery with drives that have to move at a synchronous angle occa-
sionally or permanently.
The program can be used for the master drive and the slave drive. The master works in
the "jog" and "positioning" operating modes, while the slave drives are operated in "syn-
chronous operation" mode.
If the "synchronous operation" mode is deselected for the slave drives, they can be op-
erated with free-running in "jog" and "positioning" operating modes.
The "DriveSync via fieldbus" application module has the following features:
•
Guided startup and extensive diagnostic functions.
•
Very similar yo "extended positioning via bus."
•
One program module for the master and slave drive.
•
The selected IPOS
plus®
encoder source is also effective in synchronous operation.
•
The master value for the "synchronous operation" mode can be adjusted.
•
A mechanical vertical shaft can be replaced by transferring the virtual master value
via an SBus connection.
•
Endless rotation is supported by the modulo function.
Summary of Contents for MOVIDRIVE compact MCH41A
Page 2: ...SEW EURODRIVE Driving the world...
Page 432: ......
