System Manual – MOVIDRIVE® compact Drive Inverters
265
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Operation
Safety Notes
7.8
Operation
Systems with integrated drive inverters must be equipped with additional monitoring and
protection devices, if necessary, according to the applicable safety guidelines, such as
the law governing technical equipment, accident prevention regulations, etc. Changes
to the drive inverter using the operating software are permitted.
Do not touch live components or power connections immediately after disconnecting the
drive inverters from the supply voltage because there may still be some charged
capacitors. Note the respective reference plates on the drive inverter.
Keep all covers and doors closed during operation.
The fact that the status LED and other display elements are no longer illuminated does
not indicate that the unit has been disconnected from the power supply and no longer
carries any voltage.
Mechanical blocking or internal safety functions of the unit can cause a motor standstill.
Removing the cause of the problem or performing a reset can result in the drive re-
starting on its own. If, for safety reasons, this is not permitted for the driven machine,
disconnect the unit from the mains before correcting the fault.
Summary of Contents for MOVIDRIVE compact MCH41A
Page 2: ...SEW EURODRIVE Driving the world...
Page 432: ......
