SEW-Eurodrive MOVIDRIVE compact MCH41A System Manual Download Page 27

Page: 27 / 436

System Manual – MOVIDRIVE® compact Drive Inverters

MOVITOOLS® operating software

System Description

1.5

MOVITOOLS

operating software

Description

MOVITOOLS

is a program package comprising SHELL, SCOPE and the IPOS

plus®

compiler. You can use MOVITOOLS

to address the MOVIDRIVE

MDX60B/61B and

MOVIDRIVE

compact

unit series.

•

SHELL can be used to start up the drive and set its parameters quickly and easily.

•

SCOPE provides extensive oscilloscope functions for drive diagnostics.

•

IPOS

plus®

compiler provides a user-friendly way of writing programs for applications

in a high-level language.

•

The assembler enables you to write programs directly on the machine.

•

The device status shows you the status of the connected unit.

Various application modules, such as table positioning, are already stored in MOVI-
TOOLS

as IPOS

plus®

programs and can be activated using the application version

units.

MOVITOOLS

is supplied on a CD-ROM and can also be downloaded from the SEW

homepage (http://www.sew-eurodrive.de). MOVITOOLS

can be operated with the fol-

lowing operating systems:

•

Windows

•

Windows

•

Windows NT

4.0

•

Windows

2000

•

Windows

•

Windows

02719AEN

Figure 7: MOVITOOLS

window

Summary of Contents for MOVIDRIVE compact MCH41A





















































































































































































































































































































































































































































Search results

Summary of Contents for MOVIDRIVE compact MCH41A

Reviews:

Related manuals for MOVIDRIVE compact MCH41A

Brands by name

Popular brands

SEW-Eurodrive MOVIDRIVE compact MCH41A, System Manual

Search results

Summary of Contents for MOVIDRIVE compact MCH41A

Reviews:

Related manuals for MOVIDRIVE compact MCH41A

Brands by name

Popular brands