278
System Manual – MOVIDRIVE® compact Drive Inverters
9
Installation instructions for the basic unit
Installation
9
Installation
9.1
Installation instructions for the basic unit
Tightening
torques
•
Only use genuine connection elements. Note the permitted tightening torques
for MOVIDRIVE
®
power terminals.
– Size 1
→
0.6 Nm
– Size 2
→
1.5 Nm
– Size 3
→
3.5 Nm
– Sizes 4 and 5
→
14 Nm
•
The permitted tightening torque of the signal terminals is 0.6 Nm.
Minimum clear-
ance and mount-
ing position
•
Leave 100 mm clearance at the top and bottom for optimum cooling. There is no
need for clearance at the sides. You can line up the units directly next to one another.
With sizes 4 and 5 do not install any components that are sensitive to high tempera-
tures within 300 mm of the top of the unit. Only install the units vertically. You must
not install them horizontally, tilted or upside down.
59847AXX
Figure 95: Observe the tightening torques
Nm!
60136AXX
Figure 96: Minimum clearance and mounting position of the units
E
Q
E
Q
E
Q
100 mm
100 mm
E
Q
E
Q
E
Q
Summary of Contents for MOVIDRIVE compact MCH41A
Page 2: ...SEW EURODRIVE Driving the world...
Page 432: ......
