Description
The top fan assembly in E3h and E4h drives consists of 2 fans
within a single fan housing. The top fan replacement kit
contains all parts required to replace 1 fan in the top fan
assembly.
Part number
Kit description
176F3176
Top fan for IP20 enclosure
Table 1.1 Part Number for the Top Fan Kit
Items Supplied
The door fan replacement kit contains the following:
•
1 fan
•
Installation instructions
Safety Instructions
Only qualified, Danfoss authorized personnel are allowed to
install the parts described in these installation instructions.
Disassembly and reassembly of the drive must be done in
accordance with the corresponding
service manual
.
WARNING
ELECTRICAL SHOCK HAZARD
VLT
®
series drives contain dangerous voltages when
connected to mains voltage. Improper installation, and
installing or servicing with power connected, can cause
death, serious injury, or equipment failure.
To avoid death, serious injury, or equipment failure:
•
Only use qualified electricians for the installation.
•
Disconnect the drive from all power sources before
installation or service.
•
Treat the drive as live whenever the mains voltage
is connected.
•
Follow the guidelines in these instructions and local
electrical safety codes.
WARNING
DISCHARGE TIME
The drive contains DC-link capacitors, which can remain
charged even when the drive is not powered. High voltage
can be present even when the warning LED indicator lights
are off. Failure to wait 40 minutes after power has been
removed before performing service or repair work can result
in death or serious injury.
•
Stop the motor.
•
Disconnect AC mains and remote DC-link power
supplies, including battery back-ups, UPS, and DC-
link connections to other drives.
•
Disconnect or lock PM motor.
•
Wait 40 minutes for capacitors to discharge fully.
•
Before performing any service or repair work, use
an appropriate voltage measuring device to make
sure that the capacitors are fully discharged.
Installation Instructions
Top Fan Replacement for E3h/E4h Drives
Danfoss A/S © 06/2017 All rights reserved.
MI35N102
