System Manual – MOVIDRIVE® compact Drive Inverters
113
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Explanation of the parameters
Parameters
P078 Technology
function
Displays the currently set technology function.
The function is set via MOVITOOLS
®
in "Startup – Select technology function".
•
STANDARD: Setting for operation of drive inverter with the functions described in the
system manual (positioning, speed control, etc.).
•
ELECTRONIC CAM: Setting for technology function "Electronic cam" to coordinate
the operation of several drives. Prerequisites are:
– Motor with encoder feedback
– Inverter in unit design "Application version"
•
ISYNCH: Setting for technology function "Electronic synchronous operation" to syn-
chronize the operation of several drives with accurate positioning. Prerequisites are:
– Motor with encoder feedback
– Inverter in unit design "Application version"
•
AUTO / ASR: Special solution for optimum load distribution of the drive power for run-
ning gear with multiple-axle drive.
•
SBUS / TP: Special solution for sending data in an event-controlled manner depen-
ding touch probe events.
P079 Device type
Displays the device type.
•
STANDARD: Application modules and technology functions are not available.
•
TECHNOLOGY: Application modules and technology functions are available.
P08x Fault memory
P080 ... P084 Error
t-0 ... t4
There are 5 error memories (t-0 ... t-4). The errors are stored in a chronological se-
quence with the most recent error event being held in error memory t-0. If there are more
than 5 errors, the error event of longest standing, stored in t-4, is deleted.
Programmable error responses: see table P83x.
The following information is stored at the time of the error and can be displayed in the
event of an error:
•
Status (“0“ or “1“) of binary inputs/outputs
•
Operating status of the inverter
•
Inverter status
•
Heat sink temperature [°C]
•
Speed [1/min]
•
Output current [% I
N
]
•
Active current [%]
•
Unit utilization[%[
•
DC link voltage [V]
•
Operating hours [h]
•
Enable hours [h]
•
Parameter set [1/2]
•
Motor utilization 1 and 2 [%]
P6..
P60.
P600
Summary of Contents for MOVIDRIVE compact MCH41A
Page 2: ...SEW EURODRIVE Driving the world...
Page 432: ......
