System Manual – MOVIDRIVE® compact Drive Inverters
9
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
System overview
System Description
General
description
MOVIDRIVE
®
compact
is the term used to describe compact and powerful drive invert-
ers from SEW-EURODRIVE. Perfectly matched to your requirements, you can use
MOVIDRIVE
®
compact
to realize AC drives in the power range from 1.5 to 90 kW.
Thanks to tried and tested inverter technology and SEW control modes, you can meet
the highest demands in terms of both dynamics and control quality.
Unit series
The MOVIDRIVE
®
compact
range includes four series:
Unit variants
The MCF, MCV and MCS series are available in 2 variants:
•
MCF/MCV/MCS40A: Control via binary inputs and setpoint selection via analog set-
point input.
•
MCF/MCV/MCS41A: Control via either PROFIBUS-DP interface or binary inputs.
Setpoint selection via PROFIBUS-DP interface.
The MCH series is available in 3 variants:
•
MCH40A: Control via binary inputs and setpoint selection via analog setpoint input.
•
MCH41A: Control via either PROFIBUS-DP interface, binary inputs or analog out-
puts. Setpoint selection via PROFIBUS-DP interface.
•
MCH42A: Control via either INTERBUS-LWL (FO) interface or binary inputs. Set-
point selection via INTERBUS-LWL (FO) interface.
Unit versions
MOVIDRIVE
®
compact
drive inverters are each available in two versions, namely the
standard version and the application version.
Standard version
Units are equipped with the integrated IPOS
plus®
positioning and sequence control sys-
tem as standard and can be extended with the available options.
The standard version is indicated by the characters "00" at the end of the unit designa-
tion.
Application version
In addition to the features of the standard version, these units include the technology
functions "electronic cam" and "internal synchronous operation." You can also use all
the application modules available in the MOVITOOLS
®
software package with the ap-
plication versions.
The application version is indicated by the characters "0T" at the end of the unit desig-
nation.
•
MOVIDRIVE
®
compact MCF:
Drive inverter for asynchronous AC motors without
encoder feedback, VFC control mode.
•
MOVIDRIVE
®
compact MCV:
Drive inverter for asynchronous AC motors with encoder
feedback, either VFC or CFC control mode.
•
MOVIDRIVE
®
compact MCS:
Drive inverter for synchronous servomotors with encoder
(resolver), SERVO control mode.
•
MOVIDRIVE
®
compact MCH:
Drive inverter for either asynchronous AC motors, asyn-
chronous servomotors or synchronous servomotors.
Encoder feedback with either a Hiperface encoder, sin/cos
encoder or TTL sensor.
Summary of Contents for MOVIDRIVE compact MCH41A
Page 2: ...SEW EURODRIVE Driving the world...
Page 432: ......
