Rohde & Schwarz CMU-K20, Operating Manual

Page: 92 / 646

Non Signalling: Power Measurements CMU-K20/K21/K22/K23/K24
1115.6088.12 4.14 E-11
The following analyzer settings are described in more detail in section RF Analyzer Settings
(Connection Control – Analyzer) on p. 4.69 .
Frequency
The Frequency hotkey defines the frequency of the analyzed signal in MHz.
Remote control
[SENSe:]RFANalyzer:CHANnel <Number>
Channel
The Channel hotkey defines the GSM channel number of the analyzed signal.
Remote control
[SENSe:]RFANalyzer:CHANnel <Number>
Frequency
Offset
The Frequency Offset hotkey defines a frequency offset relative to the signal
frequency or GSM channel frequency defined with the Frequency or Channel
hotkeys.
Remote control
[SENSe:]RFANalyzer:FREQuency:OFFSet <Offset>
Training
Sequence
The Training Sequence hotkey defines a training sequence for the analyzed signal.
Remote control
[SENSe:]RFANalyzer:TSEQuence <TSC>
Generator
Settings
The Generator Settings softkey configures the RF signal generated.
The following generator settings are described in more detail in section Generator
Settings (Connection Control – Generator) on p. 4.75 .
RF Level
The RF Level hotkey defines the generator level in the used timeslot in dBm.
Remote control
SOURce:RFGenerator:LEVel:UTIMeslot <Level>
Frequency
The Frequency hotkey defines the frequency of the RF generator signal in MHz.
Remote control
SOURce:RFGenerator:FREQuency[:CHANnel] <Frequency>
Channel
The Channel hotkey defines the GSM channel number of the generator signal.
Remote control
SOURce:RFGenerator:FREQuency[:CHANnel] <ChannelCH>
Frequency
Offset
The Frequency Offset hotkey defines a frequency offset relative to the signal
frequency or GSM channel frequency defined with the Frequency or Channel
hotkeys.
Remote control
SOURce:RFGenerator:FM:DEViation <Offset>
Training
Sequence
The Training Sequence hotkey selects a training sequence for the generator
signal.
深圳德标仪器
135-1095-0799