Rohde & Schwarz CMU-K20, Operating Manual

Page: 427 / 646

CMU-K20/21/22/23/24 Signalling: POWer[:NORMal]
1115.6088.12 6.123 E-12
DISPlay:POWer[:NORMal][:GMSK]:CONTrol:GRID <Enable> Grid
DISPlay:POWer[:NORMal]:EPSK:CONTrol:GRID <Enable>
<Enable> Description of parameters Def. value Def. unit FW vers.
ON |
OFF Switch on grid lines
Switch off grid lines ON – V1.15
Description of command
This command switches the grid lines in the test diagrams on or off.
CONFigure:POWer[:NORMal]:EPSK:CONTrol:RPMode <Mode> Ref. Power Mode
<Mode> Description of parameters Def. value Def. unit FW vers.
CURRent |
AVERage |
DCOMpens Ref. Power calculated from current burst
Ref. Power calculated from average curve
Data compensated/corrected reference power CURR – V2.15
Description of command
This command determines how the reference power (0-dB line in the P/t Norm. 8PSK test diagram) for 8PSK-
modulated signals is calculated.
CONFigure:POWer[:NORMal][:GMSK]:CONTrol:DEFault <Enable> Default Settings
CONFigure:POWer[:NORMal]:EPSK:CONTrol:DEFault <Enable>
<Enable> Description of parameters Def. value Def. unit FW vers.
ON |
OFF The parameters are set to their default values
Some or all parameters are not set to default ON
– V2.00
Description of command
If used as a setting command with the parameter ON this command sets all parameters of the subsystem to their
default values (the setting OFF causes an error message).
If used as a query the command returns whether all parameters are set to their default values (ON) or not (OFF) .
深圳德标仪器
135-1095-0799