Rohde & Schwarz CMU-K20, Operating Manual

Page: 81 / 646

CMU-K20/K21/K22/K23/K24 Non Signalling: Analyzer/Generator Menu
1115.6088.12 4.3 E-11
Measurement
results The output fields in the left half of the Analyzer/Generator menu show the current
measurement results. The results depend on the selected application. They are
described in detail in section
Measurement Results on p. 4.6 f.
The results displayed in the Analyzer/Generator menu represent only a small
fraction of the power and modulation results that the CMU is able to acquire. A
comprehensive set of test results is displayed in the
Power and Modulation
measurement menus; see sections Power Measurements on p. 4.8 ff. and
Modulation Measurements on p. 4.38 ff. In particular, the Power and Modulation
menus show many quantities as functions of time.
The Analyzer/Generator menu can be opened from the Menu Select menu (with associated key at the
front of instrument). The hotkeys associated to the Menus softkey switch over between the
Analyzer/Generator menu and the remaining measurement menus of function group
GSM400/850/900/1800/1900-MS Non Signalling .
Menu Select Menu Select
Fig. 4-1 Measurement menu Analyzer/Generator (example: P/t Norm. GMSK)
Test Settings
The settings for the Analyzer/Generator menu are accessible via softkey/hotkey combinations. If a
softkey (located in the softkey bar on the right side of the menu) is selected and an associated hotkey
(displayed across the bottom of the menu) is pressed, a popup window indicating the current setting
and enabling an entry will appear.
Example:
Analyzer
Settings
The Analyzer Settings softkey displays a hotkey bar including the hotkey labeled
Frequency .
深圳德标仪器
135-1095-0799