Rohde & Schwarz CMU-K20, Operating Manual

Page: 433 / 646

CMU-K20/21/22/23/24 Signalling: POWer[:NORMal]
1115.6088.12 6.129 E-12
Subsystem POWer[:NORMal]...:LIMIt:ABPower
The subsystem POWer[:NORMal]...:LIMit:ABPower defines the limit values for the average normal
burst power. The subsystem corresponds to the tab Limits in the popup menu Power Configuration.
CONFigure:POWer[:NORMal][:GMSK]:LIMit:ABPower<nr> Average Burst Power
<StartPCL>, <StopPCL>, <LowerLimit>, <UpperLimit>
CONFigure:POWer[:NORMal][:GMSK]:LIMit:ABPower<nr>:ENABle <Enable>
Parameter Value range Description of parameters Def. value
<Enable>
<StartPCL>,
<StopPCL>,
<LowerLimit>,
<UpperLimit> ON | OFF
0 to 31 | MAX
0 to 31 | MAX
–10.0 dB to 0.0 dB
0.0 dB to +10.0 dB
Definition section on/off
Start value for PCL
End value for PCL
Lower level limit
Upper level limit see
below
see
below
Description of command FW vers.
These commands determine the tolerances for ranges of power control levels (PCLs). <nr> is the
number of the group (
} 10 ,..., 1 {
>∈ <
nr )
The setting MAX is synonymous with the highest PCL of the mobile, depending on its power class.
V1.15
4 level ranges are defined in the default setting, another 6 ranges can be activated if required. The default
settings for GSM 900/1800/1900 are according to the following table. The default settings for GSM850 and
GSM400 are identical to GSM900:
For Enable for table
Suffix Enable StartPCL StopPCL LowerLimit UpperLimit
1 ON MAX MAX –2.0 dB +2.0 dB
2 ON 0 2/8/8 –2.0/–3/–3 dB +2.0/3.0/3.0 dB
3 ON 3/9/9 15/13/13 –3.0/–4/–4 dB +3.0/4.0/4.0 dB
4 ON 16/14/14 31/28/29 –5.0 dB +5.0 dB
5 OFF/ON/ON OFF/29/30 OFF/29/31 OFF/–2.0/–2.0 dB OFF/5.0/2.0 dB
6 OFF/ON/OFF OFF/30/OFF OFF/31/OFF OFF/–3.0 dB/OFF OFF/2.0 dB/OFF
10 OFF OFF OFF OFF OFF
深圳德标仪器
135-1095-0799