Rohde & Schwarz CMU-K20, Operating Manual

Page: 87 / 646

CMU-K20/K21/K22/K23/K24 Non Signalling: Power Measurements
1115.6088.12 4.9 E-11
Measurement Menu (Power)
The graphical measurement menu Power shows the results of the burst analysis (power
measurement).
•
The measurement control softkey P/t Norm. GMSK, which changes to P/t Norm. 8PSK, P/Frame
etc., depending on the power measurement application and on the modulation scheme selected)
controls the power measurement, indicates its status (RUN | HLT | OFF) and opens the
configuration menu Power Configuration . The hotkeys associated to the measurement control
softkey define the scope of the Power measurement.
•
The other softkeys to the right of the test diagram are combined with various hotkeys (e.g. the
hotkeys Template PCL, Frequency, Channel, Frequency Offset, and Training Sequence belong to
the softkey Analyzer Settings). The softkey/hotkey combinations provide test settings and switch
over between different measurements.
The measurement menu Power is opened from the main menu Menu Select (with the associated key at
the front of the instrument) or using the Menus softkey and the Power hotkey.
Menu Select Menu Select
Fig. 4-2 Measurement menu Power – P/t Norm. GMSK
Test Settings
The basic settings for the Power measurement are directly accessible from the measurement menu via
softkey/hotkey combinations. The entry of values is described in section Test Settings on page 4.3 .
Many of the basic settings are also accessible from the Power Configuration popup menu. They are
explained in more detail in section Measurement Configurations (Power Configuration) on page 4.28 ff.
深圳德标仪器
135-1095-0799