Rohde & Schwarz CMU-K20, Operating Manual

Page: 467 / 646

CMU-K20/21/22/23/24 Signalling: Receiver Quality
1115.6088.12 6.163 E-12
Receiver Quality – Continuous
The subsystem RXQuality:BAVerage contains the commands for receiver quality measurement with
continuous repetition. The subsystem corresponds to the main menu Receiver Quality, application BER
Average and the corresponding parts of the associated popup menu Receiver Quality Configuration.
Control of Measurement – Subsystem RXQuality:BAVerage
The subsystem RXQuality:BAVerage controls the Continuous measurement.
INITiate:RXQuality:BAVerage Start new measurement
⇒
RUN
ABORt:RXQuality:BAVerage Abort running measurement and switch off
⇒
OFF
STOP:RXQuality:BAVerage Stop measurement
⇒
STOP
CONTinue:RXQuality:BAVerage Next measurement step (only stepping mode )
⇒
RUN
Description of command FW vers.
These commands have no query form. They start or stop the Continuous measurement, setting it to
the status indicated in the top right column. V2.00
CONFigure:RXQuality:BAVerage:EREPorting < Mode > Event Reporting
<Mode> Description of parameters Def. value Def. unit FW vers.
SRQ |
SOPC |
SRSQ |
OFF Service request
Single operation complete
SRQ and SRSQ
No reporting
OFF – V2.00
Description of command
This command defines the events generated when the measurement is terminated or stopped (event reporting,
see chapter 5).
FETCh:RXQuality:BAVerage:STATus? Measurement Status
Return Description of parameters Def. value Def. unit FW vers.
OFF |
RUN |
STOP |
ERR |
STEP |
RDY,
1 to 500 |
NONE Measurement in the OFF state (
*RST
or
ABORt
)
Running (after
INITiate, CONTinue
or
READ
)
Stopped (
STOP
)
OFF (could not be started)
Stepping mode (<stepmode>=STEP)
Stopped according to repetition mode and stop condition
Counter for current evaluation period (frame)
No averaging
OFF
NONE –
– V2.00
Description of command
This command is always a query. It returns the status of the measurement (see chapter 5).
深圳德标仪器
135-1095-0799