Rohde & Schwarz CMU-K20, Operating Manual

Page: 515 / 646

CMU-K20/21/22/23/24 File Management – System MMEMory
1115.6088.12 6.211 E-12
MMEMory:L3MSg:SAVE [<FileName>] [,<msus>]
Save to File
Parameters
Parameter description Def. value Def. unit FW vers.
"<FileName>",
INTernal | EXTernal
Name of the file to be saved
Storage device of the file to be saved see description
INTernal –
– –
V3.10
Description of command
This command has no query form. It saves the current ring buffer content to the default logging file
INTERNAL\LOG\GSM_L3_?.LOG (if no parameter is specified, see command
MMEMory:L3MSg:CDEStination
) or to the specified file and storage device. In the default file name
"GSM_L3_?.LOG" the "?" is replaced by current numbers that are automatically incremented, starting with zero.
The auto-increment function overwrites an existing file with a "9" in its file name. The command is CMU-specific.
Note: The default directory for logging files
INTERNAL\LOG
is fixed and can not be overwritten by
the base system command
MMEMory:CDIRectory
.
MMEMory:L3MSg:BWRiting <Enable>
Buffer Writing
Parameters
Parameter description Def. value Def. unit FW vers.
ON | OFF
Activate or deactivate buffer writing OFF – V3.10
Description of command
This command controls data recording into the ring buffer. The command is CMU-specific.
MMEMory:L3MSg:BEMPty?
Buffer Empty
Ret. Parameters
Parameter description Def. value Def. unit FW vers.
EMPT |
FULL
Buffer contains no data
Buffer contains data – – V3.10
Description of command
This command is always a query and returns whether or not the buffer is empty. The command is CMU-specific
and has no equivalent in manual control.
深圳德标仪器
135-1095-0799