Rohde & Schwarz CMU-K20, Operating Manual

Page: 598 / 646

List of Commands CMU-K20/21/22/23/24
1115.6088.12 6.294 E-12
Command, Signalling Parameter Remark Page
FETCh:ARRay:SPECtrum:SWITching[:GMSK]
:AMPoints:POWer? –100.0 dB to +100.0 dBm query only 6.119
READ:SUBarrays:SPECtrum:SWITching[:GMSK]? –100.0 dB to +100.0 dBm query only 6.119
FETCh:SUBarrays:SPECtrum:SWITching[:GMSK]? –100.0 dB to +100.0 dBm query only 6.119
SAMPle:SUBarrays:SPECtrum:SWITching[:GMSK]? –100.0 dB to +100.0 dBm query only 6.119
Symbolic Status Register Evaluation
STATus:OPERation:SYMBolic:ENABle <Event>{,<Event>} with query 6.173
STATus:OPERation:SYMBolic[:EVENt]? NONE | <Event>{,<Event>} query only 6.173
Trigger
TRIGger:OUTPut:PIN:DELay:VALue 0 to 7 with query 6.176
TRIGger:OUTPut:PIN<nr>:DELay:ENABle ON | OFF with query 6.176
TRIGger:OUTPut:PIN<nr>:SIGNal NONE | FCL with query 6.176
TRIGger[:SEQuence]:DEFault ON | OFF with query 6.177
TRIGger[:SEQuence]:SLOPe POSitive | NEGative with query 6.176
TRIGger[:SEQuence]:SOURce SIGNalling | FRUN | RFPower
| IFPower with query 6.175
TRIGger[:SEQuence]:THReshold:IFPower <Threshold> with query 6.176
TRIGger[:SEQuence]:THReshold:RFPower LOW | MEDium | HIGH with query 6.175
Wideband Power
INITiate:WPOWer – no query 6.35
ABORt:WPOWer – no query 6.35
STOP:WPOWer – no query 6.35
CONTinue:WPOWer – no query 6.35
CONFigure:WPOWer:CONTrol:REPetition CONTinuous | SINGleshot | 1
... 10000, SONerror |
NONE,STEP | NONE with query 6.36
CONFigure:WPOWer:EREPorting SRQ | SOPC | SRSQ | OFF with query 6.36
FETCh:WPOWer:STATus? OFF | RUN | STOP | ERR |
STEP | RDY, 1 ... 10000
|
NONE
query only 6.36
READ[:SCALar]:WPOWer? –30 dBm to +30 dBm query only 6.37
FETCh[:SCALar]:WPOWer? –30 dBm to +30 dBm query only 6.37
深圳德标仪器
135-1095-0799