Rohde & Schwarz CMU-K20, Operating Manual

Page: 477 / 646

CMU-K20/21/22/23/24 Signalling: Symbolic Status Event Register Evaluation
1115.6088.12 6.173 E-12
Symbolic Status Event Register Evaluation
The following commands are used to retrieve the events reported in function groups
GSM400/850/900/1800/1900-MS Signalling ; see section Symbolic Status Event Register Evaluation in
Chapter 5 of the CMU operating manual.
STATus:OPERation:SYMBolic:ENABle <Event>{,<Event>} Symbolic status evaluation
Parameter list Parameter description
Def. Value
5
Default Unit FW vers.
<Event>{,<Event>} |
NONE List of symbols for events to be reported
No event reported NONE – V3.05
Command description
This command enables event reporting for one or several events in the current GSMxxx-MS Signalling function
group, i.e. it sets the corresponding bits in the
STATus:OPERation:CMU:SUM<nr>:CMU<nr_event>:ENABle
register
(<nr> = 1 | 2, <nr_event>
denotes the current function group) and in all sum registers up to the
status byte. The events and the corresponding symbols for the function group are listed in Chapter 5 (see section
Status Registers). The symbols may be entered in arbitrary order.
STATus:OPERation:SYMBolic[:EVENt]? Symbolic status evaluation
Response Parameter description
Def. Value
6
Default Unit FW vers.
NONE |
<Event>{,<Event>} No event in the RF function group
List of reported events
NONE – V3.05
Command description
This command is always a query. It lists the events reported in the current GSMxxx-MS Signalling function group
and deletes these events in the
STATus:OPERation:CMU:SUM<nr>:CMU<nr_event>:EVENt
register as well
as in all sum registers.
5
The default values quoted in this command are achieved after a
STATus:PRESet
command.
*RST
does not overwrite the entries in the status registers; see section
Reset Values of the Status Reporting Systems in chapter 5.
6
The default values quoted in this command are achieved after a
*CLS
command.
*RST
does not overwrite the entries in the status registers; see section Reset Values of
the Status Reporting Systems in chapter 5.
深圳德标仪器
135-1095-0799