Rohde & Schwarz CMU-K20, Operating Manual

Page: 408 / 646

Common: SPECtrum:MODulation CMU-K20/21/22/23/24
1115.6088.12 6.104 E-12
FETCh:SPECtrum:MODulation[:GMSK]:STATus?
FETCh:SPECtrum:MODulation:EPSK:STATus?
Measurement Status
Returned values Description of parameters Def. value Def. unit FW vers.
OFF |
RUN |
STOP |
ERR |
STEP |
RDY,
1 to 10000 |
NONE,
1 to 1000 |
NONE Measurement in the OFF state (
*RST
or
ABORt
)
Running (after
INITiate, CONTinue
or
READ
)
Stopped (
STOP
)
OFF (could not be started)
Stepping mode (<stepmode>=STEP)
Stopped according to repetition mode and stop condition
Counter for current statistics cycle
No counting mode set
Counter for current evaluation period within a cycle
Statistic count set to off
OFF
NONE
NONE –
–
– V1.20
Description of command
This command is always a query. It returns the status of the measurement (see chapters 3 and 5 of CMU man-
ual).
Subsystem SPECTrum:MODulation:CONTrol
The subsystem SPECtrum:MODulation:CONTrol defines the repetition mode, statistic count, and stop
condition of the measurement. These settings are provided in the Control and Meas X tabs of the popup
menu Spectrum Configuration .
CONFigure:SPECtrum:MODulation[:GMSK]:CONTrol < Mode>,<Statistics >
CONFigure:SPECtrum:MODulation:EPSK:CONTrol < Mode>,<Statistics > Scope of Measurement
<Mode> Description of parameters Def. value Def. unit
SCALar |
ARRay Only scalar measured values
Scalar measured values and arrays ARRay –
<Statistics> Description of parameters Def. value Def. unit FW vers.
1 to 1000 |
NONE Number of bursts per statistics cycle
Statistics off (equivalent to 1) 200 – V1.20
Description of command
This command restricts the type of measured values and determines the number of bursts within a statistics cy-
cle.
深圳德标仪器
135-1095-0799