Rohde & Schwarz CMU-K20, Operating Manual

Page: 568 / 646

List of Commands CMU-K20/21/22/23/24
1115.6088.12 6.264 E-12
Command, Signalling Parameter Remark Page
STEP | RDY, 1 to 10000 |
NONE, 1 to 1000 | NONE
CONFigure:MODulation[:PERRor][:GMSK]:TIME:DECode STANdard | GTBits with query 6.68
READ[:SCALar]:MODulation[:PERRor][:GMSK]? <Result> query only 6.69
FETCh[:SCALar]:MODulation[:PERRor][:GMSK]? <Result> query only 6.69
SAMPle[:SCALar]:MODulation[:PERRor][:GMSK]? <Result> query only 6.69
READ:ARRay:MODulation[:PERRor][:GMSK][:CURRent]? –100.0 dB to +100.0 dB query only 6.70
FETCh:ARRay:MODulation[:PERRor][:GMSK][:CURRent]? –100.0 dB to +100.0 dB query only 6.70
SAMPle:ARRay:MODulation[:PERRor][:GMSK][:CURRent]? –100.0 dB to +100.0 dB query only 6.70
READ:SUBarrays:MODulation[:PERRor][:GMSK][:CURRent]? –100.0 dB to +20.0 dB query only 6.71
FETCh:SUBarrays:MODulation[:PERRor][:GMSK][:CURRent]? –100.0 dB to +20.0 dB query only 6.71
SAMPle:SUBarrays:MODulation[:PERRor][:GMSK][:CURRent]? –100.0 dB to +20.0 dB query only 6.71
Modulation measurement: GMSK Modulation, Extended Phase Error
INITiate:MODulation:XPERror[:GMSK] – no query 6.72
ABORt:MODulation:XPERror[:GMSK] – no query 6.72
STOP:MODulation:XPERror[:GMSK] – no query 6.72
CONTinue:MODulation:XPERror[:GMSK] – no query 6.72
CONFigure:SUBarrays:MODulation:XPERror[:GMSK] ALL | ARIThmetical |
MINimum | MAXimum |
IVAL,<Start>,<Samples>{,<St
art>,<Samples>} with query 6.76
READ:ARRay:MODulation:XPERror[:GMSK]:AVERage? –100.0 dB to +100.0 dB query only 6.78
FETCh:ARRay:MODulation:XPERror[:GMSK]:AVERage? –100.0 dB to +100.0 dB query only 6.78
SAMPle:ARRay:MODulation:XPERror[:GMSK]:AVERage? –100.0 dB to +100.0 dB query only 6.78
READ:SUBarrays:MODulation:XPERror[:GMSK]:AVERage? –100.0 dB to +20.0 dB query only 6.79
FETCh:SUBarrays:MODulation:XPERror[:GMSK]:AVERage? –100.0 dB to +20.0 dB query only 6.79
SAMPle:SUBarrays:MODulation:XPERror[:GMSK]:AVERage? –100.0 dB to +20.0 dB query only 6.79
CONFigure:MODulation:XPERror[:GMSK]:CONTrol SCALar | ARRay, 1 to 1000 |
NONE with query 6.73
CONFigure:MODulation:XPERror[:GMSK]:CONTrol:DEFault ON | OFF with query 6.74
CONFigure:MODulation:XPERror[:GMSK]:CONTrol:REPetition CONTinuous | SINGleshot | 1
to 10000, SONerror | NONE,
STEP | NONE with query 6.74
深圳德标仪器
135-1095-0799