NEC N8405-019, User Manual

Page: 9 / 384

- vii -
Installation, Relocation, Storage, and Connection
CAUTION
Do not install or store the server in any place other than specified.
Do not install or store the server in the following places or any place other than
specified in this manual. Failure to follow this instruction may cause a fire.

a dusty place

a humid place such as near a boiler

a place exposed to direct sunlight

an unstable place
Do not use the server in the place where corrosive gases exist.
Make sure not to locate or use the server in the place where corrosive gases
(sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia, ozone,
etc) exist.
Also, do not set it in the environment where the air (or dust) includes
components accelerating corrosion (ex. sulfur, sodium chloride) or conductive
metals. There is a risk of a fire due to corrosion and shorts of an internal printed
board.
Do not use any unauthorized interface cable.
Use only interface cables provided by NEC and locate a proper device and
connector before connecting a cable. Using an unauthorized cable or
connecting a cable to an improper destination may cause a short circuit,
resulting in a fire.
Also, observe the following notes on using and connecting an interface cable.

Do not use any damaged cable connector.

Do not use any damaged cable.

Do not step on the cable.

Do not place any object on the cable.

Do not use the server with loose cable connections.
Do not pinch your finger with mechanical components.
Note sufficiently that your fingers may not be caught between a door and
another mechanical part or cut at installation or removal of the product in/from
the server.